Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: lcs226 on September 15, 2024, 12:12:11 AM

Title: Program Auto Load
Post by: lcs226 on September 15, 2024, 12:12:11 AM

Is there a way or online examples of automatically loading a CNC program based on an integer value set to Mach4?

I have a new CNC that we are building that will have multiple jigs for different product. Each jig has a coded plug attached to it. When plugged in, the PLC knows what clamps and sensors to use and can send a value to Mach4.

Title: Re: Program Auto Load
Post by: cncmagic on September 19, 2024, 09:05:21 PM

do a search for 'Load Gcode'.. lots of information available and examples that should help.  :P