Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: ironman123 on August 13, 2024, 09:00:57 PM

Title: Mach3 XP
Post by: ironman123 on August 13, 2024, 09:00:57 PM

Attached is a copy of my controller card for 4 axis hook up.  I do not know which wires to hook up to the Signal Input interface terminals P13, P12, P11, P10, P15.
Any assistance would be greatly appreciated.
Thank you

Ray

Title: Re: Mach3 XP
Post by: JohnHaine on August 14, 2024, 02:42:36 AM

It should be obvious from the Mach3 manual.  They are for estop, limits, and probe etc

Title: Re: Mach3 XP
Post by: ironman123 on August 14, 2024, 03:20:54 PM

Thanks for the reminder of the manual.