Machsupport Forum

Third party software and hardware support forums. => HiCON Motion Controller => Topic started by: novation1 on July 29, 2024, 03:03:30 PM

Title: ANYONE KNOW THE FACTORY IP SETTING ON THE 7766 BLUE BOARD?
Post by: novation1 on July 29, 2024, 03:03:30 PM

Just had to reset Windows due to a bad update. I don't have access to the original documentation for this board. I'm pretty sure  the IP address on the board is still at the factory setting. I just can't find anywhere that show what  that is. Any help with this would be appreciated.

Title: Re: ANYONE KNOW THE FACTORY IP SETTING ON THE 7766 BLUE BOARD?
Post by: TPS on July 30, 2024, 02:01:18 AM

from the manual:

firmware  pre-assigned  IP  address  is192.168.0.35