Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: klmark on November 17, 2007, 04:58:15 PM
-
Hi Guys
As I have posted before on this problem I don't know maybe I am the problem Attach are to file One is LC cam toolpath JPG file all looks good in LC as you will see on the file if I post it to mach 3 I get those z axis moves that should not be there as you will see they show up in the Tool path JGP file
Would Please let me someone know what I am doing wrong or if there is a problem in the software Don't get me wrong I like the software and I appreciate the hard work that it had to take to get there
Klmark
-
klmark
lcam will look at a move like this.
g00 z.200 as a rapid move - showing a broken line
g01 z.200 as a chain - showing a solid line
when you take a drawing with no z moves,then add z depth of cut with a feedrate then generate g-code with lcam.
then import it back into lcam you will see the z travel as a chan.
-
Yes but how do I get rid of them ? A guy can do it manual but if you want to do a part in a hurry it is no fun
klmark
-
Hi Guys
Am I the only guy with that problem so no one can tell me what I do wrong It can,t be that I am the only guy using Lcam because it is a nice and simply program to us I run every file through Lcam to get my G code file
Thank you klmark