Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: Steamenthusiast on June 10, 2024, 08:20:09 AM

Title: G-code from Mach3 to Mach4
Post by: Steamenthusiast on June 10, 2024, 08:20:09 AM

I have got hold of a Wabeco F1210 milling machine with Mach4 installed. I have used Mach3 on another millingmachine for years.
Problem 1: When I generate G-codes for thread milling using the thread milling wizzard in Mach3, it will not work in Mach4.
Problem 2: I am not able to change possible or relevant settingsin Mach4, which also leads to
Problem 3: I cannot make the edgefinder move by itself to touch and determine positions.
Can anybody help?

Title: Re: G-code from Mach3 to Mach4
Post by: Graham Waterworth on June 10, 2024, 05:27:50 PM

You need to explain why its not working, can you not load it or will it not run the code once loaded.