Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: RYRY on April 25, 2024, 02:38:23 PM
-
Hello,
I have been running Mach 3 for a while on my computer and machine, I had a servo go down. I replaced it with the exact same model, I got it all running but the feeds and speeds are significantly slower than they were before. It is happening on both servo and motor not just the one I changed.
I have uninstalled Mach 3 and reloaded it with the version I knew worked and had all the saved settings, but no luck to get the spindle speed to increase or the traverse to increase.
Thanks Ryan