Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: spanky on April 08, 2024, 06:55:01 PM

Title: cncest 6040 limit switch function & config
Post by: spanky on April 08, 2024, 06:55:01 PM

I cannot get the limit switches to be recognized on this machine. no indication that they are active. I have traced the wires and tested with a meter. Can someone help with setting them up?

Title: Re: cncest 6040 limit switch function & config
Post by: TPS on April 10, 2024, 06:05:56 AM

without knowing the exact hardware of your control box it will be hard to help.
maybe this:

https://www.youtube.com/watch?v=tYulWcAqjR4

can help.

Title: Re: cncest 6040 limit switch function & config
Post by: Charlie_M on April 20, 2024, 07:11:33 PM

 This might help.
https://buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board (https://buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board)