Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: jacques_w on April 03, 2024, 05:00:59 AM

Title: Control and change of XHX-USB-Motion card
Post by: jacques_w on April 03, 2024, 05:00:59 AM

My 6040z cnc is controlled by XHC-USB-card V2.59.6. (see picture). Question is: How can I change these settings, it seems that they are set in concrete. The output settings as well as input IO state must be empty according to the documentation. How do I change this. The Chinese manufacturer as well as the reseller of this 6040z is silent about how I should/can change this. Can someone gif me some solutions about this problem

Title: Re: Control and change of XHX-USB-Motion card
Post by: JohnHaine on April 03, 2024, 08:26:48 AM

As of August last year on this forum people were recommending that this unit should not be used with Mach4.

https://www.machsupport.com/forum/index.php?topic=36023.60

Title: Re: Control and change of XHX-USB-Motion card
Post by: jacques_w on April 03, 2024, 09:19:52 AM

Maybe I wasn't clear, but I'm using Mach3 as control