Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: ram1955 on February 12, 2024, 11:40:32 AM

Title: Err code 40 on MK100 VFD Spindle Control China ChinaZone 6040 5ax CNC
Post by: ram1955 on February 12, 2024, 11:40:32 AM

Hey Gang,
This may not be the Proper Forum, However, I was setting up My MK100 VFD Spindle Controller to work with Mach3; Now the when running the Spindle manually from the VFD control Panel, The Spindle Runs for about 3 seconds the stops and Errors 40, So, I need To Reconfigure back to Manual control, I need to know what settings in this VFD can cause this Error.
Thanks for Helping