Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Giuno85 on January 14, 2024, 12:09:43 PM

Title: CONTINUATION OF PROCESSING AFTER STOP CYCLE ONLY WITH SPINDLE ON
Post by: Giuno85 on January 14, 2024, 12:09:43 PM

Good evening everyone, during the execution of the work cycle, it may happen that you need to interrupt the cycle by giving the Stop cycle, and then restart from that stopping point.
However, if you start the cycle, processing starts again regardless of whether the spindle is turning or stopped. This can lead to breakage of the cutter or damage to the machine.
I ask if there is an option in Mach 3 that can ensure that the cycle cannot restart until the spindle is turned back on... Or if anyone knows, perhaps even through a script, how to manage this thing

Title: Re: CONTINUATION OF PROCESSING AFTER STOP CYCLE ONLY WITH SPINDLE ON
Post by: Giuno85 on January 14, 2024, 03:59:44 PM

also merge or invoke the Run From Here command... anyone have any ideas?