Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: Toecutter on January 14, 2024, 01:45:52 AM

Title: Custom Screen Set Transfer
Post by: Toecutter on January 14, 2024, 01:45:52 AM

Hello,
I adapted and converted an original screen to my machine on the desktop PC in the office, including some new images. How do I get this screen set onto my PC that is attached to the machine? I tried to insert the screen set file, but Mach4 crashes when loading the screen.
Thank you, greetings René

Title: Re: Custom Screen Set Transfer
Post by: Bill_O on January 15, 2024, 12:53:55 PM

Just to make sure i understand.
You start M4 then go to View and Load Screen.
At that point it crashes?

Title: Re: Custom Screen Set Transfer
Post by: Toecutter on January 15, 2024, 02:41:22 PM

Yes, thats Right.

Title: Re: Custom Screen Set Transfer
Post by: Bill_O on January 15, 2024, 03:13:11 PM

Then i would think one of 2 things.

Bad code in your custom screen
or
different versions of the software between the desktop and the operating computer.

If it is neither of those your guess is as good as mine.

Title: Re: Custom Screen Set Transfer
Post by: cncmagic on January 16, 2024, 10:44:06 AM

there are some items that don't port over in the screen set itself.. did you change anything else besides the objects on the screen?  :o

Title: Re: Custom Screen Set Transfer
Post by: Toecutter on January 19, 2024, 01:03:08 PM

Hello,
Thanks for the help, the screen is now ready and it works, I have no idea why it works now, I think the file I used was damaged.
Thanks
Greetings René