Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: bycole on January 10, 2024, 02:41:30 PM

Title: Highlight toolpath when scrolling through G-code
Post by: bycole on January 10, 2024, 02:41:30 PM

Hello,
I started on Mach 3 and now I'm on Mach 4.  Is there a way on 4 to highlight the toolpaths as you are scrolling through the G code?   I can't figure out how to turn that on in 4.

thanks

Title: Re: Highlight toolpath when scrolling through G-code
Post by: rhtuttle on January 12, 2024, 12:05:34 PM

It is there you just can't see it. You will have to go to 'operator->edit screen' then click on the 'Toolpath' component that you want to change and then in the tree to the left change line width of the path to a larger number. get out of edit screen and regen toolpath.

HTH

RT