Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: SWBerrett on January 01, 2024, 01:31:54 PM

Title: B Axis Laser Control w/ LED - Help
Post by: SWBerrett on January 01, 2024, 01:31:54 PM

Happy New Year

I am using the B Axis Dir- signal to control the 0-10v laser control thru a relay.  Working great.  Takes the delay out of the laser starting and stopping.

But I would like to add a LED to signal is the laser is On or Off, before I power it up.

Would anyone know if I can get the status of the Dir- signal?

Thanks
Spencer