Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: Rikard Levenstam on December 23, 2023, 12:08:42 PM

Title: Postprocessor Fusion 360 and probing :)
Post by: Rikard Levenstam on December 23, 2023, 12:08:42 PM

I spend some time helping a customer with Renishaw probing in Fusion 360. My own machine is using Mach4 without probe cyckles... :)

I spend some time writing probe cycles in my postprocessor for Mach4... So now i do all probing from Fusion 360 when i set WSC + when i measure parts  8)
For single face probing i rotate probe 180 deg. and calculate mean value.... this saved me alot of time for production...
Anyone doing this already?

/Rikard

Title: Re: Postprocessor Fusion 360 and probing :)
Post by: Cbyrdtopper on January 08, 2024, 09:19:52 AM

I had thought about doing this about a year ago, but didn't have the time to put into it.  Very nice!