Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: bar553 on December 16, 2023, 11:50:04 AM

Title: Error meanings
Post by: bar553 on December 16, 2023, 11:50:04 AM

I am running Mach 4 Lathe and have been getting errors that I need to understand what they are telling me so I can try to fix.

I have a Pokeys 57e controller. 

Thanks for the help.

BAR

Title: Re: Error meanings
Post by: Graham Waterworth on December 17, 2023, 10:15:40 AM

That could be data corruption, try a different data cable and if you have this running through a network switch it needs to be direct to the controlling PC.