Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: datoshway on November 19, 2023, 05:29:26 PM

Title: GO TO ZERO button after touch plate
Post by: datoshway on November 19, 2023, 05:29:26 PM

When I am running GoTo Zero button after using a touch plate to zero.  The first move sends the Z axis beyond its travel limit and hits the stop sensor.  Deeming this button not usable!  How can I make this work?

Title: Re: GO TO ZERO button after touch plate
Post by: Graham Waterworth on November 19, 2023, 08:33:30 PM

depending on how your code sets the offsets you may need to call G54 or the tool offset for things to update in the background.