Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: tat2joeelliott on October 10, 2023, 12:48:30 PM

Title: b/c head post processor
Post by: tat2joeelliott on October 10, 2023, 12:48:30 PM

does any one write post processors? i need one for a zxbc head y table. its for an old motion master. let me know.. thanx

Title: Re: b/c head post processor
Post by: Tweakie.CNC on October 11, 2023, 07:29:03 AM

What motion controller do you have in the machine ?

Tweakie.

Title: Re: b/c head post processor
Post by: tat2joeelliott on October 11, 2023, 11:42:50 AM

its a motion master that i retrofit with a pokeys57cnc that i run with mach3

Title: Re: b/c head post processor
Post by: Tweakie.CNC on October 12, 2023, 02:04:19 AM

What is the CAD/CAM software you require the Mach3 post processor for ?

Tweakie.

Title: Re: b/c head post processor
Post by: tat2joeelliott on October 12, 2023, 07:47:09 AM

fusion 360