Machsupport Forum

Mach Discussion => Mach Screens => Topic started by: gvertiz on November 08, 2007, 03:28:26 PM

Title: Tool Path Window for A and B axis ?
Post by: gvertiz on November 08, 2007, 03:28:26 PM

Hi:
Does any of you know if its possible using Mach3Screen, to create a tool path screen control that works with A and b or C axis?

Or any other way of doing it?

I need two planes (four motors) x,y and a,b.

Thanks!

Title: Re: Tool Path Window for A and B axis ?
Post by: Tarak on November 21, 2007, 10:16:17 PM

The standard format will work with 4 axis, you need to turn on A axis in the toolpath settings.
But as far as I know B & C axis are not displayed.

Title: Re: Tool Path Window for A and B axis ?
Post by: gvertiz on November 25, 2007, 01:13:55 PM

Thanks DARC for the info!