Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: GOOMBA on July 26, 2023, 03:00:56 PM

Title: Alpha Cam Post Processor
Post by: GOOMBA on July 26, 2023, 03:00:56 PM

Hey guys, It's come to my attention that a few of our customers need some help getting a post together for Alpha Cam.
I was wondering if anyone in the community had anything for me to take a look at, even if it's only a starting point.
I know this is a far reach, either way thank you for your time!

Title: Re: Alpha Cam Post Processor
Post by: smurph on August 30, 2023, 03:40:50 AM

If AlphaCAM has a standard Fanuc post processor for say a Fanuc 21i, then that is all they need. 

Steve