Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: johncon69 on July 16, 2023, 03:23:32 PM

Title: XHC Mach4 USB control board issues
Post by: johncon69 on July 16, 2023, 03:23:32 PM

Hi Guys,

I made the mistake purchasing the XHC Mach4 USB control board and having issues trying to configure the motors.
Everything is wired as per diagrams etc. however nothing happens when i jog any axis. Motors are energized.

I noticed a lot of people having issues with trying to run this board with Mach4 software, any help would be much appreciated. thank you

Title: Re: XHC Mach4 USB control board issues
Post by: Tweakie.CNC on July 17, 2023, 01:57:07 AM

Are you using the latest XHC driver ?   https://www.cdxhctech.com/html/downloads/

Which version of Mach4 are you using ?

Tweakie.

Title: Re: XHC Mach4 USB control board issues
Post by: johncon69 on July 17, 2023, 03:55:50 AM

Hi Tweakie

Thank you for the reply, i am using the WXH USB Motion card 6 axis, reading the posts i now know i should of bought the ethernet version.

Title: Re: XHC Mach4 USB control board issues
Post by: johncon69 on July 17, 2023, 07:47:28 AM

Thanks for the driver update that worked.

Title: Re: XHC Mach4 USB control board issues
Post by: Tweakie.CNC on July 17, 2023, 08:42:33 AM

I am pleased that it worked.

Tweakie.