Machsupport Forum

Mach Discussion => Mach Screens => Topic started by: dpaish on July 06, 2023, 05:12:30 PM

Title: Looking To Hire to Build Custom Screen
Post by: dpaish on July 06, 2023, 05:12:30 PM

Greetings,
I am building a custom cut to length line.  Basically, an expensive tape measure to a chop saw.  I need a custom Mach 3 screen developed.  It only has one axis but need custom screen for movement.

Regards,
Dennis Paish 

Title: Re: Looking To Hire to Build Custom Screen
Post by: Graham Waterworth on July 06, 2023, 06:25:40 PM

Have you searched for a screen, I am sure there was one done some years ago.

Title: Re: Looking To Hire to Build Custom Screen
Post by: Graham Waterworth on July 06, 2023, 06:43:54 PM

https://www.machsupport.com/forum/index.php?topic=22243.msg154849#msg154849 (https://www.machsupport.com/forum/index.php?topic=22243.msg154849#msg154849)

This may be of help

Also search CNCSAW and OneAXIS

Title: Re: Looking To Hire to Build Custom Screen
Post by: TPS on July 07, 2023, 05:29:57 AM

here:

https://www.machsupport.com/forum/index.php?action=dlattach;topic=44218.0;attach=55060

is a very "raw" wizard i made a couple of years ago.