Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: Ken_HaWK on June 15, 2023, 02:34:28 PM

Title: btnZeroZ not working
Post by: Ken_HaWK on June 15, 2023, 02:34:28 PM

I have created a slightly custom screen for my machine. Mostly, I have deleted all things related to the 'Y' axis since the machine doesn't have one. Our machine is X, Z, A, B for several reasons.
Anyway, the 'Zero Z' button does not change the DRO, or seem to have any effect. It is configured in the screen editor the same as the 'Zero X' (which does work) except for: position, label and Name: btnZeroZ

Any suggestions on where to look for the difference and how to change it to make it work?

Title: Re: btnZeroZ not working
Post by: Bill_O on June 16, 2023, 05:54:49 PM

Verify that it says Zero Z next to Left Up Action.

Title: Re: btnZeroZ not working
Post by: Ken_HaWK on June 24, 2023, 11:57:18 AM

Thanks for the suggestion. I’ve been traveling and was just able to try this. This was not the issue but gave me another place to look.

Turns out that the problem was the dro was configured for machine coordinates rather than multiple coordinates.

Thank you Bill_O