Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: TonyM on May 26, 2023, 09:41:09 AM

Title: turn cycle can't select tool
Post by: TonyM on May 26, 2023, 09:41:09 AM

I can't seem to find where to select the tool in mach 4 in the turn cycle. I want to run a test with simple facing, and it automatically selects tool 0101 whilst i want to use tool 0707.

Title: Re: turn cycle can't select tool
Post by: rhtuttle on May 26, 2023, 09:52:54 AM

Pocket 7, offset 7