Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: benkr@telfort.nl on April 29, 2023, 05:37:22 AM

Title: Mach3 parallel port #1 port @ 0xD00 and #2 port @ 0x378 with all lines as input
Post by: benkr@telfort.nl on April 29, 2023, 05:37:22 AM

Hello, I try to set up a system with 2 parallel ports, is it possible to configure the system to use the standard 0x378 as port#2 and a PCI card port as port#1 at his specific port address?
It seems that i can't get the 0x378 port working as port#2 with all lines configured as input.