Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Shadowmuis on March 21, 2023, 02:45:17 PM

Title: emergency stop if the spindle falls on failure
Post by: Shadowmuis on March 21, 2023, 02:45:17 PM

are there settings in mach 3 that ensure that the machine stops if the inverter of the spindle jumps to failure i use a HY02D223B from haunyang because my spindle went into failure and the machine continued to run, my tapered ball nose of 90 euros broke off

Title: Re: emergency stop if the spindle falls on failure
Post by: Graham Waterworth on March 21, 2023, 05:57:45 PM

Wire the VFD error output through your e-stop.

Title: Re: emergency stop if the spindle falls on failure
Post by: Shadowmuis on March 22, 2023, 03:17:01 PM

thanks for the quick reply but can you also tell me how to do that  i'm not that good in electronics field