Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Apache_sim on March 15, 2023, 05:50:00 AM

Title: Mach 3 Jog distance
Post by: Apache_sim on March 15, 2023, 05:50:00 AM

Apologies as I am quite new to Mach 3 coming from a Duet controller.
On the Duet screen I was able to jog the spindle precise amounts i.e. 50mm, 10mm, .5mm and .05mm from the control dashboard. Is this possible with Mach 3.
apologies if this is a very basic question?
Regards
M

Title: Re: Mach 3 Jog distance
Post by: Tweakie.CNC on March 15, 2023, 06:14:15 AM

Press the TAB key.
On the MPG flyout set the Cycle Jog Step you require. Select STEP in Jog Mode. Use the Jog Buttons to move any axis in increments of the step distance you have set.

Tweakie.

Title: Re: Mach 3 Jog distance
Post by: Apache_sim on March 15, 2023, 10:53:40 AM

Thank you Tweakie,

I thought there may be fixed selectable options (buttons so to speak).
I will have a play with that later
Thanks