Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: nobby on February 26, 2023, 10:23:07 AM

Title: so if you cannot connect those nvem network controllers direct to the pc
Post by: nobby on February 26, 2023, 10:23:07 AM

even if you set the windoes 11 as a dhcp server
do you still nee a crossover cable

do other network controllers simply plug in? not have to go to a switch.

what a load of old poop

Title: Re: so if you cannot connect those nvem network controllers direct to the pc
Post by: Tweakie.CNC on February 26, 2023, 11:39:17 AM

Hi Nobby,

NVEM aka Novosun products are not supported on this forum.

Tweakie.

Title: Re: so if you cannot connect those nvem network controllers direct to the pc
Post by: joeaverage on March 02, 2023, 02:35:22 PM

Hi nooby,
that company has long since irrevocably 'blotted its copy book' by pedalling pirate copies of Mach3.

If your serious about Mach, either Mach3 or Mach4 then get yourself another motion controller, European or US made.

Craig