Machsupport Forum

Mach Discussion => Mach4 General Discussion => Mach4 Toolbox => Topic started by: Toecutter on February 26, 2023, 03:49:20 AM

Title: Can't Change Probe Value
Post by: Toecutter on February 26, 2023, 03:49:20 AM

Hello,
why can't I change a single value on the touch probe screen? To probe a bore, I can only use the values ​​that Mach 4 specifies.
I loaded the latest Mach4 version and I can't change a value there either on the machine or on another PC.

Thank you, greetings Rene