Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: RonKjr on February 23, 2023, 07:13:07 PM

Title: Big problem tunning motors
Post by: RonKjr on February 23, 2023, 07:13:07 PM

Ok I tried to set motor setting to 1280 steps for 1mm and now I can't set the speed and acceleration. When I try to type in a number for mm per minute and I click off the input space to hit save or set the ramp up speed it goes back to 0  And the sliders don't work.

Thanks
Ron