Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: dbeau47 on January 27, 2023, 07:32:01 PM
-
Able to reset other axis's just fine. In settings it looks like the coords are reset, but unable to transfer to dro.
-
you can only reset workcoordinates not machinecoords.
-
Hi,
the only way to change work coordinates in Mach is to either Home (also called Reference) that axis OR use the Home_in_PLace function.
Mach3 has always been that way and so is Mach4.
Craig