Machsupport Forum

Mach Discussion => Mach Screens => Machscreen Screen Designer => Topic started by: sadeghalikhani on January 25, 2023, 12:19:52 PM

Title: tool path chenge
Post by: sadeghalikhani on January 25, 2023, 12:19:52 PM

Hello
I am using Mach 3 for panel cutting machine but I have a problem. I can't simulate the machine. I need help very urgently. I posted a similar simulation photo.

Title: Re: tool path chenge
Post by: Klaus1311 on January 27, 2023, 03:38:08 AM

Hi,

this doesn't sound like a MachScreen problem. Please post your help request in General Mach Discussion


Klaus1311