Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: cncwoodprojects on January 24, 2023, 05:22:11 PM

Title: Macro for set all tools offsets in ATC
Post by: cncwoodprojects on January 24, 2023, 05:22:11 PM

Hi, i looking for a macro for measure all tool offsets in a row (i have 6 tool holders and space for 15 tool holders).

I found this one in youtube but without the macro/script shared and i see its a good script for save time. https://www.youtube.com/watch?v=SLq_s0FQ-SA (https://www.youtube.com/watch?v=SLq_s0FQ-SA) 

Anyone have something similar or this script?

Thanks for your help.

Title: Re: Macro for set all tools offsets in ATC
Post by: JohnHaine on January 25, 2023, 04:53:59 AM

It looks neat but would be better if you didn't have to manually clip a wire on the tool each time.

Title: Re: Macro for set all tools offsets in ATC
Post by: cncwoodprojects on January 25, 2023, 06:01:35 AM

With my touch probe this isn't a problem it's a tool setter "with switch" and i don't need to ground the spindle (but ground spindle isn't a problem).