Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: frapo on January 03, 2023, 01:14:37 PM

Title: slow jogging speed
Post by: frapo on January 03, 2023, 01:14:37 PM

Hi all
I have a strange problem in mach3,my jogging speed is set a 75 and with the arrows its jogs just fine.
But when i add a code in the bar for example x0 z1 and enter its jogs horrebly slow with a lot off noise.

Title: Re: slow jogging speed
Post by: JohnHaine on January 04, 2023, 04:07:02 AM

Try G0 x0 z1?

Title: Re: slow jogging speed
Post by: frapo on January 04, 2023, 06:44:01 AM

That did the trick,thank you john.

Title: Re: slow jogging speed
Post by: JohnHaine on January 04, 2023, 08:49:23 AM

Good!  You need to put the Gcode in the MDI window as well as coordinates.