Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: grsfldflyer on December 10, 2022, 09:28:57 AM

Title: Mach4 and Windows 11 M62 P# issue
Post by: grsfldflyer on December 10, 2022, 09:28:57 AM

  I found that in Mach4 g-code with M62 P# will lock up intermittently.
  anyone else seen this?? I would recommend not using Windows 11 Pro.
 

Title: Re: Mach4 and Windows 11 M62 P# issue
Post by: grsfldflyer on December 12, 2022, 07:35:53 AM

Quote from: grsfldflyer on December 10, 2022, 09:28:57 AM

  I found that in Mach4 g-code with M62 P# will lock up intermittently.
  anyone else seen this?? I would recommend not using Windows 11 Pro.
  Arc-Ok came on and stayed on until arc went out due to peirce hole to large.
  I loaded the old Mach3 Files and machine does not stop until finish with G-code so I don't belive its a noise issue.
 

Title: Re: Mach4 and Windows 11 M62 P# issue
Post by: KatzYaakov on December 13, 2022, 07:35:22 PM

i recommend not touch win 11 many of the drivers and inverters supplier software not work with win 11
best wait until all will update