Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Sailsoon on November 28, 2022, 03:33:07 PM

Title: Mach3 M10P1
Post by: Sailsoon on November 28, 2022, 03:33:07 PM

Hi,
I am new to this forum, hope this is not a repeated many times question...

How to set laser power with M10 codes as one can with M3 S*  ?

Thanks

Title: Re: Mach3 M10P1
Post by: Tweakie.CNC on November 30, 2022, 05:11:21 AM

The M11P*/M10P* commands are only for turning the laser ON/OFF to set the laser power you need to do some additional work. The easiest method I have found for adjusting laser power is detailed in this & the other linked threads...  https://www.machsupport.com/forum/index.php?topic=12444.msg265104#msg265104
Hope this helps.

Tweakie.

Title: Re: Mach3 M10P1
Post by: Sailsoon on December 01, 2022, 02:10:21 PM

Thank you.