Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Doily on October 17, 2022, 02:03:08 PM

Title: spindel speed
Post by: Doily on October 17, 2022, 02:03:08 PM

My spindel speed is not working on my dro

Title: Re: spindel speed
Post by: reuelt on November 22, 2022, 06:03:51 AM

The DRO is by default set to the spindle actual speed as recorded by a (tachometer) index sensor.
If you do NOT have a tachometer index sensor on your spindle, the DRO cannot display any speed.

(If you have a VFD, you can edit the screen to change the DRO to display programmed spindle speed instead)