Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: sungyeolyang on July 02, 2022, 10:26:10 AM

Title: Solidcam 2022 post processor request Mach 4
Post by: sungyeolyang on July 02, 2022, 10:26:10 AM

I use Mach 4, is the post processor perfectly matched to Mach 4
(I use Solidworks 2022 ).

My product is made with a Chinese stepping motor,
The controller is an Ethernet Smooth Stepper.

I am struggling with the post process.
Please share a compatible post processor file

Thank you all.

Title: Re: Solidcam 2022 post processor request Mach 4
Post by: joeaverage on July 03, 2022, 08:25:07 PM

Hi,
what CAM program are you using?

Craig