Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Fredrik on June 20, 2022, 02:48:05 AM

Title: How to setup ARF CNC 6040Z
Post by: Fredrik on June 20, 2022, 02:48:05 AM

Hello
Have an ARF CNC 6040Z Mach3 that was my dad who suddenly passed away.
He had a hard time getting it to work so I wonder if anyone has the RIGHT settings to send to me so I can start over. He had installed Mach3 on a laptop and I have read that PC is to recommend?

Is there anything else I should think about?

Fredrik

Title: Re: How to setup ARF CNC 6040Z
Post by: Charlie_M on June 20, 2022, 05:27:08 AM

So after doing some research you probably have the 6040 with a usb motion control card. If this correct then you first need to install the plugin (RNRMotion.dll) for mach3.I may have my xml from my old setup if you want it to see if you can get something going. that is where I would start.

Title: Re: How to setup ARF CNC 6040Z
Post by: klintsmith on June 20, 2022, 11:17:47 AM

Hello dude, I have the same question, can someone help to fix this prob?

Title: Re: How to setup ARF CNC 6040Z
Post by: Charlie_M on June 20, 2022, 11:59:57 AM

I can try. What's going on

Title: Re: How to setup ARF CNC 6040Z
Post by: Charlie_M on June 26, 2022, 07:30:40 AM

 You gents still need help?