Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Charlie_M on June 18, 2022, 12:51:05 PM

Title: uc400eth plugin won't enable
Post by: Charlie_M on June 18, 2022, 12:51:05 PM

 Hello everyone,

   I am running  licensed mach3 4.043.062 on a win7 machine and I have a uc400eth motion controller.
 problem Im having is the plugin will not enable. If I enable it and restart mach3 it goes back to disabled.
Any ideas on this issue? Thanks.

Charlie