Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: CARTHO on June 17, 2022, 12:24:47 PM
-
Hi
In Mach3 version 3.043.062 I perform command G01 X1 F1000 in direct mode
The machine moves to X1.000 but the readout on the screen is suddenly X+0.998
This started today and after I have been calibrating all axis.
Now I try to calibrate back to the same distance that I asked to move but still screen differs from my input when I try to make a direct move!
Even when I Run a program for example Z-0.5 the display shows Z-0.4998
Can anyone figure out this and help me out?