Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Harry_22 on June 07, 2022, 03:31:29 AM

Title: Workpiece angle compensation
Post by: Harry_22 on June 07, 2022, 03:31:29 AM

Hi guys,

Is there a way in Mach3 to input a workpiece compensation angle value into Mach3 its self, or is there a relevant G-Code line that can do this?

 

Title: Re: Workpiece angle compensation
Post by: TPS on June 14, 2022, 06:05:48 AM

G68 might be your friend