Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: Oli81 on May 19, 2022, 09:55:13 AM

Title: Problem with Mach4 Turn newbee
Post by: Oli81 on May 19, 2022, 09:55:13 AM

Hello there

With the help of Sturat I found a PP for Mach4 and Fusion 360.

But I’ve no idea what is going wrong or what I’m doing wrong with this Mach4 turn.

Using Mach4 for all my mills but complete new in turning.

So I’ve just made a video here to show what my problem is.

https://youtu.be/rmZS18MdwOo (https://youtu.be/rmZS18MdwOo)

If anybody can help me, that would be so great  ;D

You find the G-Code attached which I’m using in my Video and also my log file of this test.

If you need any other information, please let me know.

Working with Windows and ESS Smoothstepper

Cheers Oli

Title: Re: Problem with Mach4 Turn newbee
Post by: Oli81 on May 19, 2022, 09:56:56 AM

Upload of the files was not working trying again.

Title: Re: Problem with Mach4 Turn newbee
Post by: rhtuttle on May 19, 2022, 11:37:54 AM

Try running it with the ;Simulation Device' motion controller. I ran it on mine and the code executes.  Possible conflict with your spindle being an OB and ESS.
HTH
RT