Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: kolias on March 18, 2022, 10:05:43 AM

Title: Text Engraving Software
Post by: kolias on March 18, 2022, 10:05:43 AM

Never done any engraving but I want to replace the paper printed labels in my control panel for something better. The letters will not be anything larger than 1” most likely around 1/4" to 1/2".

Searching for a software which also will give me the g-code I came up with Roland Dr. CNC Text engraving but have no idea if it’s the best software out there. I will be using Mach3 in my home made CNC.

Any suggestions which software is suitable for text engraving?

And which material to use. Perhaps plastic blanks?

Thanks

Title: Re: Text Engraving Software
Post by: JohnHaine on March 18, 2022, 04:06:43 PM

F Engrave

Title: Re: Text Engraving Software
Post by: kolias on March 18, 2022, 04:37:48 PM

Thanks John for your time