Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: JeeyBee on March 17, 2022, 06:46:06 AM

Title: Plasma M3 probing the wrong way?
Post by: JeeyBee on March 17, 2022, 06:46:06 AM

When executing M3 in the plasma profile the probe move in + instead of -, is there some setting to change this?
If I do a g31.0 z-10 f100 for example ir moves in minus as it should.

Attached a screen shot of the settings.