Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: rufustoad on February 24, 2022, 10:36:30 PM

Title: VFD Mach 4 Config with C11G BOB
Post by: rufustoad on February 24, 2022, 10:36:30 PM

WOW am I having problems setting up Mach4 with my VFD and C11G board. Is anyone able to point me in a direction to configure this?? Just FYI I have this all configured in Mach 3 and everything is working perfectly. I am making the move to Mach4 and this is my last struggle that I have been on for weeks. The pin 14/16 enabled and mapping Mach is a little confusing and very little tutorial videos available.

Title: Re: VFD Mach 4 Config with C11G BOB
Post by: KatzYaakov on February 25, 2022, 03:27:40 AM

which hardware? how you control yours VFD? some basic details so some one can try help you

Title: Re: VFD Mach 4 Config with C11G BOB
Post by: rufustoad on February 25, 2022, 08:06:05 AM

I am using a C11G BOB with a smooth stepper. I am controlling the Delta VFD just like this diagram I have attatched except I am running the DMI off of Rel 1 not 2.
I configured Mach exactly like the CNC4PC config is layed out in the instructions below and no luck 

Title: Re: VFD Mach 4 Config with C11G BOB
Post by: rufustoad on February 25, 2022, 08:07:57 AM

Sorry I missed the other diagram

Title: Re: VFD Mach 4 Config with C11G BOB
Post by: KatzYaakov on February 25, 2022, 08:11:08 AM

now more clear but sorry i use pokeys ,bout CNC4PC bater search some one with this hardware experience