Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: FiveO on February 10, 2022, 07:36:15 AM

Title: Post processor for Solidworks CAM to Mach4
Post by: FiveO on February 10, 2022, 07:36:15 AM

Hi!

I found that I need Fanuc 21i post processor. I am using Solidworks CAM and Mach4, and on there is only FANUC10M,11M,16M and FANUCOM. Where do I find the right file to use?


Thanks