Machsupport Forum

Mach Discussion => VB and the development of wizards => Topic started by: dresda on January 18, 2022, 09:51:16 PM

Title: Using Mach3 digitizing as a stand alone to run anther machine
Post by: dresda on January 18, 2022, 09:51:16 PM

So I still have Mach3 licence on an old desktop and the machine i use is a Milltronics 7 pc based. it had digitizing at some point using stand alone pc with Digiscan software which is now obsolete, is there any way somebody could help me figure out how to install a macro or some how DNC the digitizing mach3 program and then using my skip g31 function sort of thing if you know what I mean, because I don't.
Thanks, Ray.