Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Billykerr19 on January 13, 2022, 05:01:43 AM
-
Good morning from not so sunny Scotland.
I am looking for one of you kind folks in the internet world to try and help a fellow out.
I purchased a second hand cnc router to make some wooden and acrylic signs which I have been doing for about 10 months now so not so much a newbie but work in progress.
The machine is a custom built machine running mach3 and aspire 10.5.
I have a makers guide touch plate that came with the machine and would love to set it up but I am kinda failing to do so.
I was wondering what i am doing wrong as i cant even find in mach3 where to input any of the values.
Failing that I can buy a new touch plate and see if thats easier to install
Thanks in advance
Billy Kerr
-
https://www.avidcnc.com/support/instructions/archived/accessories/touchplate/