Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: LaMach67 on December 23, 2021, 12:02:35 PM

Title: interesting homing issue
Post by: LaMach67 on December 23, 2021, 12:02:35 PM

Hello guys and Merry Xmass for all from SOCAL

I swapped out a generic (joke) cnc motion card to a ZK Motion card for many reason more output, more input up to 6 axis and more robust.  As you can see on the video after hitting home switch Z axis travel about 1.5-2 inches down and then creeping back up to home, takes 1 min on 20%, then the Y axis doing the same thing  but it travels +5 inches then its creeping back to the homing switch, I did not find anything in the Mach3 to control these issue anyone know where the problem lies?


https://youtu.be/e3f84tTlt1o