Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: imajeenyus on October 18, 2007, 06:42:21 PM

Title: Mach3 Demo - printer port working?
Post by: imajeenyus on October 18, 2007, 06:42:21 PM

Hi,

     Currently have Mach2 and am trying out Mach3 demo prior to buying. Could anyone tell me if the demo of Mach3 will actually control stuff through the printer port or can it only simulate running programs? I'm not getting any pulses on the port.

Thanks,

Lindsay

Title: Re: Mach3 Demo - printer port working?
Post by: Chaoticone on October 18, 2007, 06:47:29 PM

Mach3 demo will run your machine. See if you have the right ports selected in Ports and pins.

Brett

Title: Re: Mach3 Demo - printer port working?
Post by: Whacko on October 19, 2007, 09:29:29 AM

Is it on the same PC? If not, try running the alternative driver .bat file.

Whacko.